My super fantastic dust collector.
If you've ever used a serger, you know that it can generate some serious lint. With what I do, the lint can get overwhelming both physically and emotionally. I worry what all those little fibers are doing to my body and our home. My first step to battle the lint was to purchase a canister vac with a hose so I can periodically suck up the lint. This did help, however I knew I could do better.
I often wear a dust mask when I lay out skirts (just moving cut sweaters is linty) and when I sew. I found that traditional dust mask work well, but they tend to irritate my face, so I fashioned a cowboy style dust mask from several layers of fleece. Between this and the constant vacuuming, the air in my studio has improved, but constantly wearing a dust mask makes my work feel like hard work, so I began to look for an alternative.
Here I am sewing with my dust mask and headphones.
I considered buying an expensive air filter but worried that the amount of lint I generate would instantly destroy it. Instead I rigged up my own air filter using a recycled mail box, a small fan, and several layers of high lift quilt batting.
Materials:
small circular fan (mine is about 10" in diameter)
box (I recycled a 12 X 12 X 8 priority mail box, just make sure your fan barely fits inside)
2 scrap pieces of high loft polyester quilt batting the same size as your box
packing tape
box cutter or serrated bread knife
staples
ruler
1. tape the box on one side be sure to tape on the edges for all four flaps.
2. Cut a circle the approximate size of your fan using the knife (i prefer a serrated bread knife b/c it works like a saw) tape the flaps around the circle to secure.
3. on the side of your box cut a rectangular opening on three sides to allow access to your fan to turn on and off. Leave the flap attached to act like a door.
The access door for fan controls.
4. Put the fan inside the box and tape it to the bottom of the box. Pull the cord through one of the corners between the flaps.
4. On the untaped side of the box, cut off the top flap. For the three remaining flaps, measure in 1" and on the inside of the flap using the dull side of the knife (or a pen) score a line to allow easy folding.
5. fold the flaps in and then measure out 1" and cut off the remainder of the flap. fold in the flaps and tape. This will create the channel for your filter to sit.
This shot shows the handle attachment and the filter slot.
6. using 1" scraps of cardboard, staple the two layers of quilt batting to the cardboard on all four sides. I taped the corners of min to be sure they stayed together (the staples do not like to go through two layers of cardboard).
The filter sitting outside of the slot.
7. put your filter in and secure with a few straight pins (if not when you turn on your fan the air pressure will suck the filter inside the box).
This shows the filter being inserted into the slot. I taped the top of the filter and stuck a few straight pins through the cardboard to hold it in place when the fan is on.
8. Using a 3-4" scrap of cardboard, create the handle by folding it in thirds. About 1 " up from both ends of the handle cut through the outside folds and spread out to create feet. Tape the middle section around to make a smooth handle and securely tape the to the top of the box.
I have my filter placed directly behind my serger at tableheight and it seems to do a really great job pulling the dust away from me. I can actually see the dust collecting on the fiberfill. When it gets full, I will try vacuuming it first and if that fails, I'll make a new filter.
